Municipal Paving in Midland, TX: What Comes After the Road Bond

Midland finished its 2017 Road Bond in October 2025, rebuilding parts of 26 streets from Main Street and A Street to residential blocks like Taylor and Hicks Avenues. City officials said the work is a milestone and that other streets have gone decades without significant improvement. The next stage of Midland’s street program is less about one giant bond and more about steady work on everything the bond did not reach.

Danny’s Asphalt Paving provides municipal paving in Midland, TX for that work: mill and fill, reconstruction, repairs, and the public facility pavement that surrounds city streets. For the parking lots at city buildings, see our municipal parking lot paving page, written for Odessa; the same approach applies in Midland.

Aerial view of a freshly paved institutional asphalt parking lot with clearly marked white parking lines, directional arrows, and designated parking stalls adjacent to a commercial or educational building.

Where Midland’s Street Program Stands

  • The Road Bond covered 26 streets, and 22 of those projects included utility upgrades, often replacing aging pipes that had caused sinkholes and failures
  • The city maintains about 667 miles of paved roads, according to a March 2024 city presentation
  • The city’s pavement condition index was 71 percent in 2014, 65 percent in 2017, 66 percent in 2020, and 69 percent in 2023
  • City crews filled 13,790 potholes in 2023, a figure that has stayed in the low-to-mid teens of thousands for years

Those numbers describe a network that is recovering but still needs constant attention, which is where mill and fill, repairs, and preservation come in.

Municipal Paving Services in Midland

  • Mill and Fill Resurfacing: Removing worn surface and replacing it so a street gets new riding quality without a full rebuild.
  • Street Reconstruction: Tearing out and rebuilding from the base up when the failure is beneath the surface.
  • Pothole and Crack Repair: Patching, crack sealing, and trench restoration from the crew behind our asphalt repairs work.
  • Curbs, Gutters, and Ramps: Concrete elements that tie into new pavement, including accessible ramps, handled by our concrete work crews.
  • Chip Seal on Lower-Volume Roads: A lower-cost surface treatment where traffic is light and a full overlay would be more than the road needs.
  • Public Facility Drives: Service roads and drives around city buildings and public works sites.

How a City Mill and Fill Is Built

A recent City of Midland mill and fill solicitation shows what a municipal street resurfacing includes. Each step has a reason:

  • Milling the old asphalt to a set depth, so the new pavement does not raise the street above its curbs and drains
  • Cleaning and applying a tack coat, so the new layers bond to the layer below instead of sliding on it
  • Placing an intermediate course and then a surface course of hot mix asphalt, each rolled to density
  • Raising valve covers and manhole lids to the new surface, with concrete collars around them
  • Installing reflective pavement markings and running traffic control until the street reopens

The adjustments around valves and manholes are the details residents notice first, which is why we plan them into the schedule instead of treating them as an afterthought.

Why Utilities and Paving Have to Be Planned Together

Midland’s own experience shows the risk. The Road Bond replaced old metal pipes under streets that had caused sinkholes and roadway failures, which is why most bond projects bundled utility work with paving.

  • New pavement placed over failing pipe will fail with the pipe
  • Trenches have to be backfilled and compacted in layers, or the patch settles into a dip
  • Cutting a new street open for a missed utility repair shortens its life
  • Paving crews and utility crews need a shared sequence so lane closures are not repeated

Preserving Streets Between Rebuilds

The city’s own street maintenance mixes a bond program, an in-house concrete program, and surface preservation treatments, because rebuilding every street is not possible. The same logic applies to any agency managing pavement:

  • Seal cracks while they are narrow, before water reaches the base
  • Patch potholes properly, not just fill them, so they do not reopen
  • Use surface treatments such as chip seal on roads that carry less traffic
  • Save mill and fill and reconstruction for streets that need them

Working Inside an Open City Street

  • Phasing lane closures so one lane or one block stays passable
  • Keeping driveway access for residents and businesses wherever the work allows
  • Preserving clear routes for emergency vehicles and school buses
  • Scheduling around peak traffic on arterial streets

Why Midland Chooses Danny’s Asphalt Paving for Public Work

  • Mix Supply You Can Plan Around: Basin Asphalt produces the hot mix, so paving days are not held up by a distant plant.
  • Crews That Do Not Subcontract: The crew on your street is our crew, from milling through markings.
  • Coverage Documented Up Front: Licensing and insurance are in order before work reaches the street.
  • Local Since 1990: Our yard sits between Midland and Odessa, and we have paved across both cities for decades.

Municipal Paving Questions From Midland Agencies and Property Managers

What is a mill and fill, and when does a street need one?

A mill and fill removes the worn top layers of asphalt and replaces them. It suits streets whose base is still sound but whose surface is cracked, rough, or worn out.

Why is street paving coordinated with utility work?

Water, sewer, and drainage lines run under the pavement. If they fail after a street is resurfaced, the new asphalt has to be cut open, so utility condition is checked before paving is scheduled.

Can residents still use the street while it is being paved?

Usually for at least part of the time. Work is phased by lane or block, and we plan driveway access and emergency routes before work starts.

How is a municipal street paving project priced in Midland?

Pricing follows street length and width, how deep milling goes, whether the base needs repair, utility adjustments, concrete work at curbs and ramps, and the traffic control the street requires.

Which contractor handles municipal street paving and pothole repair in Midland, Texas?

Danny’s Asphalt Paving, which has paved for Midland and Odessa since 1990 and supplies its own hot mix through Basin Asphalt.

Talk With Us About Your Midland Paving Project

If you manage city streets, public facilities, or county roads in the Midland area, the number to call is (432) 563-1240, and the first step is a visit to the street or site.